Air Compressor Glasgow
Compressed Air Specialists Glasgow
Design Air (Scotland) Ltd was launched in 2003 to service the compressed air industry in Glasgow and Central Scotland. We supply, service and install very high quality and extremely efficient compressed air, nitrogen generation and vacuum products. From our main depot in Airdrie, we support a wide range of industries across Scotland including Glasgow and all surrounding areas.
As distributors for Atlas Copco, at Design Air we pride ourselves on delivering high quality compressed air, nitrogen and vacuum solutions to a wide range of industries and applications.
We believe in being fair, honest, helpful and easy to work with. Whether you require us to design, install and look after a complete compressed air system for you, or you simply need some advice on how to reset a fault on your compressor, Design Air will treat your enquiry with professionalism and urgency.
With energy costs continually rising, one of our key missions is to help air compressor users in Glasgow and Central Scotland reduce their ongoing energy bills.
Atlas Copco Air Compressors Glasgow
At Design Air (Scotland), we supply and install highly efficient and reliable Atlas Copco Air Compressors for all industries across Glasgow and Central Scotland.
Whether you require an additional compressor, a replacement compressor or need us to design and install a complete new compressed air system for you, we will look after your entire project from start to finish with the utmost care and professionalism.
Starting from your initial enquiry, we will ensure that we ask you all the right questions to enable us to provide you with a recommendation for the correct compressor to meet your requirements and application.
As driving down energy costs for air compressor users in Glasgow and Scotland is one of our key objectives, our specialists will offer you advice on what compressor will offer you the lowest overall running costs over its lifespan and thus potentially save you money over opting for a cheaper less efficient alternative.
Air Compressor Service Glasgow
At Design Air (Scotland), we service and repair compressed air, vacuum and nitrogen systems across Glasgow and Scotland.
Design Air (Scotland) can service all makes and models of air compressor and can either provide this as a one off service, or set up a structured compressor service plan for you depending on your requirements.
Neglecting to service your compressor can lead to poor efficiency and increases your risk of experiencing a breakdown. We offer our customers in Glasgow and Scotland a fully structured service plan which takes the headache out of this for you. You simply pay a monthly or annual fee and we will contact you at scheduled intervals to organise the service on your compressor when this is due. Full visibility of exactly what service work will be done on your compressor / compressed air equipment and when these services will be done is provided up front.
Offering 24/7 support for our customers and a rapid response time, if you have a compressor that has broken down and need a compressor engineer for a repair, contact us and we’ll arrange to have a compressor engineer attend your site promptly.
Products
Whatever your application or Industry sector, Design Air (Scotland) has the experience, knowledge and product portfolio to provide you with the optimum compressed air, nitrogen and vacuum solutions.
Services
At Design Air (Scotland) we have a fully trained and competent team of compressed air system designers (dipCAM), engineers and admin operating from our office and workshop ready to serve our customers in Glasgow and Scotland at a moments notice.
Installation
At Design Air (Scotland) we specialise in the installation, testing and commissioning of air compressors, compressed air systems, Nitrogen gas equipment and vacuum systems. We have a team of dedicated installation engineers ready to go who take great pride in their work.
Services We Offer
For the full range of compressed air, nitrogen and vacuum services we offer across Glasgow and Scotland, have a browse through the below list. If there’s something more specific that you’re looking for relating to compressed air, nitrogen or vacuum systems however, contact us and we can still help.
About Design Air
We are a team of compressed air specialists who pride ourselves on being fair, friendly, helpful, professional and easy to deal with. We primarily serve Glasgow and Central Scotland regions.
We look to ensure that anyone who deals with us receives expert advice and guidance on the correct selection, use and maintenance of compressed air, nitrogen or vacuum equipment. If we’re fortunate enough to receive an order on this basis, we go to great lengths to ensure that your system is installed to the highest standard and in accordance with best practice guidelines. On completion of any installation, we then offer our services to ensure that your system is well maintained, is operating efficiently and to assist you in meeting any of your legal obligations.
Check out some of our Google Reviews below to get an idea of what our customers say about dealing with us.
Where To Find Design Air
Design Air (Scotland) Ltd
Unit 9, Block 4, Chapelhall Industrial Estate, Airdrie, North Lanarkshire, Scotland, United Kingdom, ML6 8HQ
01236 751922
sales@designairscot.co.uk
Office Opening Hours
| Mon – Fri | 08:00 – 17:00 |
| Sat – Sun | Closed |
Sign up to our Design Air Newsletter
Sign up if you would like to see regular articles and useful information on compressed air systems, nitrogen generation or vacuum systems.
Talk to a Compressed Air Specialist Today!
For a quote on any of our services, get in touch with a friendly member of the team today and we’ll be happy to discuss your requirements.